search

VectorSave™10 for Autel Evo II series

€439.00

VectorSave™10 for Autel Evo II series parachute system is a 85g total safety solution for Autel Evo helicopters. The system has easy back-pack clip connection top of the frame. It can be mounted or removed in seconds. It does NOT require any modification to your Autel Evo so your warranty is not voided.
VectorSave™ Evo is by far the best insurance for your drone and any valuable property around the area you will be operating your drone.

 

- If your battery fails props will stop and cause parachute to deploy.

- Pilot can initiate emergency stop to deploy parachute.

- Not sensitive for unbalanced props.

- Suitable for Autel Evo series drones

Quantity

VectorSave™ Autel Evo parachute system all-in-one solution. The launch tube holding the parachute has built-in sensor and power. It will detect extreme angle and free fall deploying the parachute on those conditions. Tube can be reloaded unlimited times.Parachute is packed inside the tube and parachute shock cord is connected to simple harness.

Once you are ready to take off you will arm your parachute
sytem by pressing the buttom on VectorSave™
unit. Blue light will start to blink to indicate your parachute
is armed. One you land back you need to press same
button again to disarm parachute system - arming
indicator light is now solid green and system will power off in 20s if it is not re-armed.

system weight: 75g
parachute size: 0.8m2
launch conditions:
- angle
- free fall
charge and firmware update connector: micro USB
shock cord strength: 420 kg

In the package you will receive everything you need to set system up on Autel Evo drone.

VectorSave™ is the most compact and reliable rescue system in the market offering you a minimum penalty to your flight time.

132300
997 Items